This website was prepared by webajans.com.
The tooth tips are made from M42 alloy high-speed steel (8% cobalt) with a hardness of 67-68 HRC. Suitable for general-purpose cutting of metals up to 45 HRC. Offers higher wear resistance than standard M42 blades.
MADE IN GERMANY
| Width (W) | Thickness (T) | Teeth per Inch |
|---|---|---|
| 6 mm | 0.60 mm | 6-8-(10/14) |
| 6 mm | 0.90 mm | 6-10-14-(10/14) |
| 10 mm | 0.60 mm | 6-8-18-(10/14) |
| 10 mm | 0.90 mm | 6-10-14-(10/14) |
| 13 mm | 0.60 mm | 6-10-14-(6/10)-(8/12)-(10/14) |
| 13 mm | 0.90 mm | 3-4-6-8-10-14-(6/10)-(10/14) |
| 20 mm | 0.90 mm | 3-4-14-18-(4/6)-(5/8)-(6/10)-(8/12)-(10/14) |
| 27 mm | 0.90 mm | 2-3-4-6-8-10-14-(2/3)-(3/4)-(4/6)-(5/8)-(6/10)-(8/12)-(10/14) |
| 34 mm | 1.10 mm | 1.25-2-3-4-6-8-10-(2/3)-(3/4)-(4/5)-(4/6)-(5/8)-(6/10)-(8/12) |
| 41 mm | 1.30 mm | 1.25-2-3-4-(1.5/2)-(2/3)-(3/4)-(4/5)-(4/6)-(5/8)-(6/10) |
| 54 mm | 1.60 mm | 1.25-2-3-(0.75/1.25)-(1.1/1.6)-(1.5/2)-(2/3)-(3/4)-(4/5)-(4/6) |
| 67 mm | 1.60 mm | 1.25-2-(0.75/1.25)-(1.1/1.6)-(1.5/2)-(2/3)-(3/4)-(4/5) |
| 80 mm | 1.60 mm | 0.75-1.25-(0.75/1.25)-(1.1/1.6)-(1.5/2)-(2/3) |
Teeth per inch (TPI): number of teeth over 2.54 cm.
Testeresan offers sharpening service.
Click to get detailed information about the brand.
Click to get detailed information about the brand.
Click to get detailed information about the brand.
